top of page

Specifications

 

  • THD < 0.01%THD

  • Signal to Noise Ratio > 110dB

  • Stereo Separation 90dB

  • Preamp Output 9.5V RMS / 14V Peak

  • Dimensions in mm: 119(W) x 39(H) x 214(L) Overall: 119(W) x 39(H) x 245(L)

Features and Functions

 

  • 8-Channels in/8-Channels out line driver at 9.5 Volt RMS, 14 Volts peak

  • Input signal summing by channel pair

  • Dash remote for Volume and Bass control

  • Bass Recovery for factory head unit

 

ASP-OE8   8-ch. OEM Speaker Level to Preamp with Bass Recovery

ASP-OE8
ASP-OE8

The ASP-OE8 is a sophisticated processor with low impedance, high voltage inputs designed to accept the high power speaker level signal from a factory stereo head unit, and send out a clean,distortion free preamp level signal. With the ASP-OE8 the consumer can create a true High-end sound system without the limitations of the factory amplifier and speakers. To assure that you get audiophile level sound with the ASP-OE8, we use the same Elna Silmic ll caps and OP275 op-amps that we use in the Pro Competition Z-Series LX amplifiers. The remote mounted power supply assure you the best possible signal with the least noises. With the ASP-0E8, your car can sound every bit as good as it would sound if you used a top grade after marker head unit. And your dash remains absolutely stock.

Bass Recovery: If you are driving a fairly new car, you’re probably noticed that when you turn up the volume of the system the bass seem to drop out. That’s because the auto makers are actively equalizing your system to protect the factory speaker. Even when you add amplifiers and speakers to the car, that factory head unit will still pull out the bass frequencies when you turn up the volume. The ASP-OE8 can seamlessly put the bass back ino the system regardless of the head unit volume control, so you can leave the amp gains down and get crystal clear mids and highs and rock solid bass from the factory head unit at every volume.

bottom of page