Zapco - DC Series

The Zapco Digital Processing amplifiers and the Zapco stand alone processor are back. Same great sound, same clean Zapco power, same stealth fighter looks. What's changed? We've added a boatload of fresh processing power and improved the control program. The new DPN is easier to load and use and the hassles of loading drivers are gone. Just drop the new system onto your desktop and go.

And here's what you'll find:
* First, the new DC series takes speaker level inputs as well and preamp inputs, so hooking up to a factory system is now a breeze. Not only that, but it will sum the channels as well if need be.

* Of course the amps have a full DSP on each channel. And on the Stand-alone DSP-Z8 we have added 2 more channels so you can run an active 3-way system and still have a subwoofer output.

The Zapco DC - Series...It's back and better than ever!

DC352 - 2 Channel Digital Processing Amplifier

The DC352 gives you complete DSP control with 100 watts RMS/channel at 4 ohms and 180 watts RMS/channel at 2 ohms. Remember, all the DC series amp include the DSP-Z8 processing at no charge.

-On-Board, Full Function DSP
-Intelligent Rail Voltage Control
-Short term stable to below 1 ohm/Ch
-USB Input for PC Control
-2nd Generation Digital Programming Network
-Heavy-Duty, High-Current, Insulated Terminal Blocks
-Space Saving Flush Wiring Connections
-Bridgeable
-Three-Channel Capable
-Gate Drive Boost Circuit
-High-Current Bipolar Outputs
-Optically Isolated MOSFET Power Supply
-Three year warranty (If Authorized Dealer Installed)
-Quality Zapco construction
-Dimensions in Inches 16.38(L) x 7.12(W) x 2.35(H)

Stereo, 4 ohms: 2 x 100 Watts
Stereo, 2 ohms: 2 x 180 Watts
Bridged, 2 ohms: 1 x 360 Watts
T.H.D. + Noise: <0.015% @ 4 ohms.

Specifications:

DC752 - High power 2 channel Digital Processing Amp.

The DC752 gives you 175 watts RMS/channel at 4ohms and 360 watts RMS/channel at 2 ohms. With over 780 watts RMS at 4 ohms mono. This versatile powerhouse can drive a subwoofer, the most power hungry passive front stage, or an actively band- passed mid-bass. And all with full DSP.

Stereo, 4 ohms: 2 x 175 Watts
Stereo, 2 ohms: 2 x 360 Watts
Bridged, 4 ohm: 1 x 780 Watts
T.H.D. + Noise: <0.017% @ 4 ohms.s.

Specifications:

DC364 - 4 Channel Digital Processing Amplifier

The DC364 gives you 4 channels of DSP control with 50 watts RMS/Channel at 4 ohms and 90 watts RMS/channel at 2 ohms. With crossover, equalization and signal delay, this is the ideal amp to drive a 2-way active front stage.

Stereo, 4 ohms: 4 x 50 Watts
Stereo, 2 ohms: 4 x 90 Watts
Bridged, 2 ohms: 2 x 180 Watts
T.H.D. + Noise: <0.025% @ 4 ohms.

Specifications:

DC1004 - High Power 4 Channel Digital Processing Amp.

The DC1004 Has all the versatility of the DC360 but with 150 watts/channel at 4 ohms and 250 watts/channel at 2 ohms. all the processing for that active front stage, but with enough power to drive the whole system.

Stereo, 4 ohms: 4 x 150 Watts
Stereo, 2 ohms: 4 x 250 Watts
Bridged, 2 ohms: 2 x 500 Watts
T.H.D. + Noise: <0.017% @ 4 ohms.

Specifications:

DC656 - 6 Channel Digital Processing Amplifier

The DC656 defines versatility for car audio amplifiers. You get a DC364 4channel amplifier and a DC352 2 channel amplifier, all in one chassis. With all the digital processing of the DC series, this amp is a whole system in a single box.

Stereo, 4 ohms: 6 x 50 Watts
Stereo, 2 ohms: 6 x 90 Watts
Bridged, 2 ohms: 2 x 180 Watts
T.H.D. + Noise: <0.025% @ 4 ohms.

Specifications:

DC501 - Mono Digital Processing Amplifier

The DC501 produces 350 Watts RMS at 4 ohms and 500 watts at 2 ohms to drive your woofer. If you have a 1 ohm woofer, no problem! The entire DC series of amplifiers has our exclusive Rail Voltage Monitoring System to keep the amp stable regardless of the load, down to as low as 1/2 ohm.

-On-Board, Full Function DSP
-Intelligent Rail Voltage Control
-Short term stable to below 1 ohm/Ch
-USB Input for PC Control
-2nd Generation Digital Programming Network
-ZAPCO EHVC Output Circuitry
-Heavy-Duty, High-Current, Insulated Terminal Blocks
-Space Saving Flush Wiring Connections
-Gate Drive Boost Circuit
-High-Current Bipolar Outputs
-Optically Isolated MOSFET Power Supply
-Three year warranty (If Authorized Dealer Installed)
-Quality Zapco construction
-Dimensions in Inches 14.01(L) x 7.12(W) x 2.35(H)

Mono, 4 ohms: 1 x 350 Watts
Mono, 2 ohms: 1 x 500 Watts
T.H.D. + Noise: <0.017% @ 4 ohms.

Specifications:

DC1101 - Mono Digital Processing Amplifier

The DC1100 is the DC Series Big Boy. It gives you 825 watts RMS at 4 ohms and 1100 watts RMS at 2 ohms. And those are Zapco Class A/B watts with all the digital processing of the DC series, so you'll have 10 bands of parametric equalization just for your woofer. Can you say Perfect Bass?.

Mono, 4 ohms: 1 x 820 Watts
Mono, 2 ohms: 1 x 1100 Watts
T.H.D. + Noise: <0.015% @ 4 ohms.

Specifications:

* The crossover now runs from a shallow 6dB/Octave to a steep 36dB/Octave
* Signal delay resolution has been increased so you can now adjust down to under 3mm
* Phase can now be adjusted in 45 degree steps
* Muting, either by single channel or by channel pairs lets you hear one channel at a time
* VSE Voltage Sensitive Equalization is a fully parametric EQ band that can be set to engage at a preset signal voltage. This is great for factory integration. If your car changes the system response at a given volume you can set the VSE band to counteract the factory and keep your flat responses just like you tuned it.

Like we said, a boatload of improvements. But there is one thing that hasn't changed...
The Price! That's right, with all these improvements, the DC line remains a great value with most of the models right at the same price as last year's models. Some are even less than last year.