Zapco - Studio Series

ZAPCO is proud to introduce the New STUDIO-X amplifier series. With such a high demand for compact chassis designs, ZAPCO has once again developed a line with ZAPCO quality and continued pursuit of Sonic Purity. With the STUDIO-X amplifier line, you have a very compact chassis without compromising power or sound quality. . Make an entrance into the world of car audio with the STUDIO-X series by ZAPCO. Contact your local authorized ZAPCO dealer for further information.

ST1 is a Mono Amp.

Mono, 4 ohms: 1 x 225 Watts @ 14.4V
Mono, 2 ohms: 1 x 375 Watts @ 14.4V
T.H.D. + Noise: <0.07% @ 4 ohms

Download manual: click here

-400 Watt total music power
-Channel separation >60dB
-THD .07%
-Damping factor >650 @ 4 ohms
-Frequency response 10-25kHz
-SN Ratio >87dB
-Input Gain control
-Low level 185mV- 7V
-Features
-Battery Voltage Range of Operation 11V - 16V
-LED indicator Red/Green
-Protection (Short, Thermal, Over current) Yes
-Crossover and Subsonic filter LP
-Variable LP/ Subsonic 50hz-260hz/ 10hz-60hz
-Crossover Slope 12dB/ octave

-Dimensions mm/in
-Length 257mm / 10.25in
-Width 157mm / 6.25in
-Height 50mm / 1.95 in

-One year warranty (If Authorized Dealer Installed)
-Quality ZAPCO construction

** Designed and Engineered in the USA **

ST2 is a Two Channel Amp.

Stereo, 4 ohms: 2 x 50 Watts @ 14.4V
Stereo, 2 ohms: 2 x 75 Watts @ 14.4V
Bridged, 4 ohms: 1 x 150 Watts @ 14.4V
T.H.D. + Noise: <0.07% @ 4 ohms

Download manual: click here

-200 Watt total music power
-Channel separation >60dB
-THD .07%
-Damping factor >250 @ 4 ohms
-Frequency response 10-25kHz
-SN Ratio >85dB
-Input Gain control
-Low level 185mV- 7V
-Features
-Battery Voltage Range of Operation 11V - 16V
-LED indicator Red/Green
-Protection (Short, Thermal, Over current) Yes
-Crossover HP/FULL/LP
-Variable Hi-Low pass 50hz-500hz
-Crossover Slope 12dB/ octave

-Dimensions mm/in
-Length 172mm / 6.75in
-Width 157mm / 6.25in
-Height 50mm / 1.95 in

-One year warranty (If Authorized Dealer Installed)
-Quality ZAPCO construction

** Designed and Engineered in the USA **

ST4 is a Four Channel Amp.

Stereo, 4 ohms: 4 x 50 Watts @ 14.4V
Stereo, 2 ohms: 4 x 75 Watts @ 14.4V
Bridged, 4 ohms: 2 x 150 Watts @ 14.4V
T.H.D. + Noise: <0.07% @ 4 ohms

Download manual: click here

-200 Watt total music power
-Channel separation >60dB
-THD .07%
-Damping factor >250 @ 4 ohms
-Frequency response 10-25kHz
-SN Ratio >85dB
-Input Gain control
-Low level 185mV- 7V
-Features
-Battery Voltage Range of Operation 11V - 16V
-LED indicator Red/Green
-Protection (Short, Thermal, Over current) Yes
-Crossover HP/FULL/LP
-Variable Hi-Low pass 50hz-500hz
-Crossover Slope 12dB/ octave

-Dimensions mm/in
-Length 213mm / 8.375in
-Width 157mm / 6.25in
-Height 50mm / 1.95 in

-One year warranty (If Authorized Dealer Installed)
-Quality ZAPCO construction

** Designed and Engineered in the USA **

Please note that our Shipping Charges are estimated and may change depending on your location and on the amount of items purchased. If there is any change that is necessary to fulfill your order, we will contact prior to shipping your items. We currently only sell in the United States, INTERNATIONAL SALES are special order ONLY, Contact Us prior to submitting your order.